Table of Contents

Important Topics

Setup

Features

SWMS Menu - Improvements - Item 128091, Item 128129

The SWMS Menu has been improved in two areas:

  1. A new heading SWMS Mobile Setup groups the following pages:
  • SWMS Mobile Setup
  • Device Model List
  • SWMS Mobile Users
  • SWMS Mobile Forms
  • SWMS Help for Mobile Forms
  • SWMS Mobile Setup Wizard
  • SWMS Mobile Login
  1. In addition, Provisioning Strategies (Production) have been added to the SWMS Menu under Strategies.

Cleanup - Obsolete Pages Removed

Several obsolete or no longer required pages and reports have been removed from SWMS:

  • SNCL Picking Pallets (Item 128132) - This entity is no longer in use and has been replaced by new SWMS logic
  • SNCL Picking Strategies (Item 128133) - Replaced by SIEVERS TEAMS
  • SNCL Stocktaking Bill (Item 128135) - Use SWMS Stocktaking Reporting instead
  • SNCL Day Appraisal (Item 128136) - Function and purpose were unclear and no longer up to date
  • SNCL Move Job Bill (Item 128137)
  • SNCL Posted Stocktaking Bill (Item 128138)
  • SNCL Load Carrier Bill (Item 128139)
  • SNCL Item ABC Analysis (Item 128140) - The report is still available under "Item - ABC Analysis" in the Business Central standard
  • Various Reports (Item 128142):
    • SNCL Posted Move Job Bill
    • SNCL Posted Move Job Forklift
    • SNCL Storage Place Stocktaking Bill
    • SNCL Inventory Stock Bill
    • SNCL Stock Document Zero Stocktaking Bill
    • SNCL Outbound Stock Posting Bill
    • SNCL Inbound Stock Posting Bill
    • SNCL Posted Move Job Picker
    • SNCL Posted Outbound Stock Posting Bill
    • SNCL Posted Inbound Stock Posting Bill
    • SNCL Move Job List (Outbound Stock Posting)
    • SNCL Move Job List (Inbound Stock Posting)
  • SNCL Item Inventory List (Item 128144)

Comprehensive Cleanup of Labels - Item 128145

A comprehensive revision of labels in SIEVERS WMS has been carried out. The abbreviation "SNCL" has been largely removed from the user interface and replaced with "SWMS" where necessary. The goal was to make the labeling more consistent and understandable. The abbreviation SNCL was a legacy from the previous logistics software SNC Logistics, on which SIEVERS WMS was built.

Licensing

License management in SIEVERS WMS has been fundamentally revised to provide better control and transparency over license usage.

User Count Check - Item 128603

When creating or modifying warehouse employees and mobile users, the system now automatically checks whether the licensed user count is exceeded:

  • Warehouse Employees: Only warehouse employees with a SIEVERS WMS location are counted as requiring a license
  • Mobile Users: Mobile users always require a license, unless they are assigned to a warehouse employee
  • Links: If the link between a warehouse employee and a mobile user is removed, the system automatically checks whether a separate license is required
  • It is no longer possible to create or modify users without a successful license check

Display of License Count - Item 128608

In the list of Warehouse Employees and in the list of Mobile Users, the following is now shown at the top:

  • How many licenses are currently in use
  • How many licenses are available in total

The display is automatically updated when the license count changes (e.g. by deleting or adding users).

Access Restriction to WMS Pages - Item 128609

SIEVERS WMS pages can now only be opened by users with a valid license. A user requires a warehouse employee entry with a SIEVERS WMS location to access the pages.

If an unauthorized user tries to open a WMS page, an error message is displayed and access is blocked. This check has been implemented in all critical SWMS pages (e.g. WMS Setup, Warehouse Receipt, Warehouse Shipment Planning, Picking Documents).

License Check Also in Sandbox Environments - Item 128611

The license count is now also correctly determined in sandbox environments. The system queries the actual license of the real tenant, even if the query originates from a sandbox.

Warehouse Receipt

A1.6s Improved Sorting of Serial Numbers - Item 130305

In the MDE form A1.6s (serial number entry during warehouse receipt), newly scanned serial numbers are now added at the top of the list instead of at the bottom. This allows the user to immediately see the most recently scanned serial numbers without having to scroll manually. This is especially helpful when more than 9 serial numbers have been recorded.

A1.GS1 Document Selection Easier to Use - Item 129948

In the warehouse receipt process with GS1 labels, the purchase order can now be selected more easily:

  • F5 now opens the document selection directly (A1.GS1a)
  • The document selection has additionally been added as menu item A5

Previously, only the arrow at the edge of the form could be used.

Information

A7.4 Inventory Information - Item 120620

With the new MDE form A7.4 Inventory Information, warehouse employees can now scan inventory directly and retrieve detailed information about it. This form complements the existing information forms.

Accessing the form:

  • Via A7.1 Item Information: Scan an inventory number
  • Via A7.4 directly: Scan an item, GTIN, inventory, load carrier, GS1 or storage place

Navigation:

  • From A7.4 to other forms:
    • Scanning a storage place → switches to A7.2 Information by Storage Place
    • Scanning an item → switches to A7.1 Item Information
    • Scanning a load carrier → switches to A7.3 Load Carrier Information
    • Arrow right → opens A7.1 Item Information for the selected item

  1. Shows the storage place. For blocked inventories, the red notice "blocked" appears together with the block code
  2. Left: Load carrier code and load carrier type (SU, PTU, SSCC) | Right: Weight
  3. Left: Incoming WHS Receipt posting date | Right: DxWxH (Depth/Width/Height)
  4. Left: Item number | Right: Quantity
  5. Left: Item description | Photo symbol indicates that an image exists for this item
  6. Variant
  7. Left: Sell-by date | Right: Lot number or serial number (serial number is shown preferably)

Additional Functions:

  • F6 - Photo Function: Opens an existing item photo or the photo capture function if no photo exists yet
  • Arrow right: Opens A7.1 Item Information with all further inventories for this item

The new form enables efficient inventory checks directly via the MDE device and provides a central point of contact for information requests with flexible navigation to all relevant information levels.

A7 Improved Layout - Item 129186

In the information forms A7.1, A7.2 and A7.3, the abbreviations "Item No.", "LC", "SP" before the input fields have been removed. Instead, a uniform barcode symbol is now displayed before each input field. This corresponds to the modern design of other forms and improves usability.

Production

C1.2 Full Pallet Symbol - Item 129210

The MDE form C1.2 now uses the new full pallet symbol that has already been introduced in other forms.

C1.2 Place Load Carrier via Storage Place Scan - Item 128568

When all positions in the MDE form C1.2 "Pick Position Overview" have been processed (info field shows "Hand over load carrier"), the storage place can now be scanned directly to place the load carrier. Previously, the "Pick Up/Place Down Load Carrier" form had to be opened via F8.

C1 No Successor Teams in Successor Move Jobs - Item 129753

The field "Internal Transport Follow Team" now remains empty for successor move jobs of type "Transport to Production". The "Internal Transport Team" is correctly transferred from the original move job. This ensures that the grouping of move jobs with respect to target storage places functions correctly.

C2.2 Employee Marking on Move Job - Item 123239

Employee markings are now also recorded when an employee processes a move job in the MDE form C2.2 (Production Supply - Place Down).

Previously, employee markings were only set on the move job header during production pick-out (C1.2). This change now makes it visible in all production processes which employee is currently processing which move job.

PS Move Jobs Without Team Assignment - Item 128446

Move jobs of type "Transport to Production" that arise during processing in C1 and cannot be assigned to a team are now displayed in the Role Center as a separate tile "Move Jobs Without Team". The tile opens an overview of the corresponding move jobs so that they cannot be overlooked.

Stocktaking

Stocktaking of Blocked Inventories - Item 130725

During stocktaking, blocked inventories often also need to be counted. Previously, a stocktaking for blocked inventories could be created via the inventory overview, but an error message appeared when posting.

Via a new setup field in the SWMS Setup on the Stocktaking tab, the check for blocked inventories can now be deactivated. If this flag is set, stocktakings for blocked inventories can be created, counted and posted without any problems.

Stock Documents

Display Source No. in Stock Document - Item 130558

The "Source No." field is now displayed by default in the lines of outbound stock post. This simplifies tracking and enables faster identification of source documents directly in the stock document.

Picking

A4.MOP Box Confirmations - Mark Order Line - Item 126440

For box confirmations in A4.MOP, the current order line is now highlighted in turquoise. This allows the user to see at a glance which order they are currently carrying out the box confirmation for. This improves orientation, especially when error messages have appeared previously.

A4.MOP Instruction Improved - Item 130015

The work instruction in the MDE form A4.MOP has been made more precise. If the picker has already created a PTU in A4.2 and then selects the first position, a clearer instruction is now displayed:

"Scan SP to drop or Enter to select LC"

This makes it clear that the user can select the PTU for the current position/current order by scanning the previously created PTU and empty-confirming the field "SP LC or MOP FFV".

Move Jobs

MJ PS Filter on Location for Component Remaining Quantities - Item 128313

The fields "Overall Remaining Quantity" and "Overall Remaining Quantity (SP)" are now filtered on the location of the component line. Move job components from other locations are no longer taken into account in the totalling. This prevents misleading quantity information.

Loading

A6.1 Loading Process Selection via SSCC Scan - Item 128543

In the MDE form A6.1 "Loading Overview", the loading process can now also be selected by scanning an SSCC. Previously, only a manual selection from the list or scanning the loading process number was possible. This significantly speeds up the selection.

Series Distribution - Consideration of Weight Calculation Method - Item 129910

The weight calculation for load carriers in series distribution now takes the setup field Determination Load Carrier Weight from the SWMS Setup in the Load Carrier area into account.

Previously, this setting was already taken into account in warehouse receipt, picking and packaging. With this release, the weight calculation method is also applied in series distribution.

Outside Storage - Production Item Flag - Item 128610, Item 128353, Item 128351

Outside storage items can now be used for production orders. A new flag Production Item has been introduced for this purpose.

On the Item Card in the Outside Storage area, the flag Production Item is now available. This flag allows outside storage items to be used in production processes.

Prerequisites:

  • The item must be flagged as an outside storage item (i.e. an in/out transfer customer must be assigned)
  • The flag can only be set if the item is marked as an outside storage item

Once the Production Item flag is activated, the following changes are automatically made:

  1. Costing Method is set to "Standard"
  2. Fixed Unit Cost is set to 0
  3. No Inventory Valuation is deactivated
  4. The Costing Method and Fixed Unit Cost fields can no longer be changed afterwards

::: Note Deactivating the flag is only possible if no item entries or value entries yet exist for the item. Otherwise an error message is displayed. :::

Previously, outside storage items could not be used in production orders when the "No Inventory Valuation" flag was set. This new solution enables the use of outside storage items in production processes while also ensuring that inventory valuation is carried out correctly.

Mobile History - Technical Rollback - Item 122109

The Mobile History will in future only be used as an optional feature for troubleshooting and is deactivated by default.

This is necessary because the current implementation leads to relevant performance bottlenecks. An alternative has been implemented to ensure that navigation in Mobile, particularly jumping back, works cleanly.

Setup:

The Mobile History can be activated in the SWMS Setup if required. It is deactivated by default to optimise performance.

Minor Changes

  • Field arrangement when creating load carrier brought into SWMS standard order - Item 128344
  • Improved hint text when unpacking in packaging - Item 128530
  • Tooltip correction carried out - Item 128248
  • Picking Pallet No. removed - Item 129915
  • Icons for full pallets and negative picking in A4.2 and A4.3 revised - Item 129074
  • The Warehouse Shipment Planning now opens from the load carrier list instead of the standard warehouse shipment - Item 130153
  • A direct link to order type categories is now available in order types - Item 130903

Bugs

Incorrect Batch Formation for MOP and Series Picking - Item 130295, Item 130334

During batch formation for MOP picking and series picking, orders were incorrectly assigned:

  • During MOP batch formation, orders with order type "SERIES" were also added, even though only orders with MOP order type should have been considered
  • Orders could be simultaneously assigned to both a MOP batch and a series batch

Fix:

  • MOP batch formation now exclusively considers orders whose order type has "MOP" stored as the picking type
  • An order can now only be assigned to a maximum of one batch - according to its order type

Error When Resetting Warehouse Receipt Load Carriers - Item 128541

An error when resetting and posting warehouse receipt load carriers to the default storage place has been fixed. Previously, the hall and rack code on the load carrier were not correctly updated.

Error When Opening Warehouse Shipment from Sales Order - Item 129042

An error that occurred when opening the warehouse shipment from a sales order via the "Open Positions" function has been fixed. The error message about a modal dialog no longer appears.

Correction of Tile Status in Role Center - Item 130867

The "Load Carriers in Packaging Process" tile in the Role Center now only shows load carriers with status "6 - In Packaging". Previously, load carriers with other statuses were also displayed.

C2.2 Placing Down the Entire PS Loading Unit - Item 130781

An error that occurred when placing down the entire production supply loading unit at the target storage place has been fixed.

Stocktaking Error for Found Inventories - Item 127614

An error that occurred during stocktaking of found inventories at a different storage place has been fixed.

A3.1 Information in Transfer - Item 130871

An error has been fixed through which the information function in the transfer form A3.1 did not work correctly.

Error When Merging Inventories - Item 125998

An error when merging inventories has been fixed. The error caused merging to not work consistently.

Incorrect Quantities When Using Purchase Unit in Warehouse Receipt - Item 131656

When posting the warehouse receipt with purchase units, error messages about "over-delivery" occurred when a second load carrier was recorded for the same position.

A4.2 Display Did Not Update - Item 131967

In the MDE form A4.2 (Picking - Position Overview), already completed positions continued to be displayed. Users were able to select these positions again, even though they had already been fully picked. The display in A4.2 is now correctly updated. Completed positions are immediately removed from the list and can no longer be selected.

Minor Bug Fixes